This article needs additional citations for verification. (October 2008) (Learn how and when to remove this template message)
Adhesive tape refers to any one of a variety of combinations of backing materials coated with an adhesive. Different backing materials and adhesives can be used depending on the intended use.
Pressure-sensitive adhesive (PSA), a key component of some adhesive tapes, was first developed in 1845 by Dr. Horace Day, a surgeon. In 1901, the German Oscar Troplowitz invented an adhesive patch called Leukoplast for the German company Beiersdorf AG. In 1936, German company Beiersdorf AG invented a transparent adhesive patch called Tesa.
Adhesive strength versus shapeEdit
Adhesiveness depends not only on the type of tape but also on its macroscopic shape. Tapes with sharp corners start to detach at pointed corners.  Adhesive strength can be improved by rounding the corners.
Pressure-sensitive tape, PSA tape, self-stick tape or sticky tape consists of a pressure-sensitive adhesive coated onto a backing material such as paper, plastic film, cloth, or metal foil. It is sticky (tacky) without any heat or solvent for activation and adheres with light pressure. These tapes usually require a release agent on their backing or a release liner to cover the adhesive. Sometimes, the term "adhesive tape" is used for these tapes.
Water activated tapeEdit
A specific type of gummed tape is called reinforced gummed tape (RGT). The backing of this reinforced tape consists of two layers of paper with a cross-pattern of fiberglass filaments laminated between. The laminating adhesive had previously been asphalt but now is more commonly a hot-melt atactic polypropylene.
Water-activated tape is used for closing and sealing boxes. Before closing corrugated fiberboard boxes, the tape is wetted or remoistened, activated by water. The tape is mostly 3 inches (7.5 cm) wide.
Heat sensitive tapeEdit
Heat activated tape is usually tack-free until it is activated by a heat source. It is sometimes used in packaging, for example, a tear strip tape for cigarette packs. Conversely, thermal release tape, such as REVALPHA by Nitto Denko, loses its tack and fully releases when heated to a certain temperature. This type of tape is used often in the semiconductor industry.
- Chemistry of adhesive tapes
- Tape dispenser
- Masking tape
- Duct tape
- Electrical tape
- Sticky mat
- Journal of the American Institute for Conservation, By Merrily A. Smith, Norvell M. M. Jones, II, Susan L. Page and Marian Peck Dirda;JAIC 1984, Volume 23, Number 2, Article 3 (pp. 101 to 113)
- Tesa.de: Geschichte (German)
- Popov, Valentin L.; Pohrt, Roman; Li, Qiang (2017-09-01). "Strength of adhesive contacts: Influence of contact geometry and material gradients". Friction. 5 (3): 308–325. doi:10.1007/s40544-017-0177-3. ISSN 2223-7690.
- Friction Physics (2017-12-06), Science friction: Adhesion of complex shapes, retrieved 2018-01-02
- "Archived copy" (PDF). Archived from the original (PDF) on 2013-05-12. Retrieved 2013-04-10.CS1 maint: archived copy as title (link)
- "Pages · Towson University". towson.edu. Archived from the original on 2013-04-05.
- "ASTM D5749 - 01(2012) Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing". www.astm.org. Archived from the original on 2017-02-04. Retrieved 2017-02-02.
- Hedstrom, Gary (2005). How to Fix Everything for Dummies. For Dummies. pp. 81. ISBN 978-0-7645-7209-8.
|Wikimedia Commons has media related to Adhesive tapes.|
Lua error in Module:Authority_control at line 1069: attempt to index field 'wikibase' (a nil value).